• 25+ years specialist abrasives experience

  • Free standard delivery over £50 + vat

  • Stuck? Call us on 01677 470795

P240 finish

P240 finish

For the complete solution follow the steps indicated below. The products are ordered in order of final finishing sequence.  Begin your process at the required level for you and a beautiful 240 grit satin finish will be easily achieved.

Step 1:  Use the P80 TZ59 belts to remove any residual sanding lines.

Step 2:  Create the grain structure with the 337DC belts.

             -  337DC creates a lovely short scratch finish which replicates the orginal mill finish grain structure

 Step 3:  Blend the overall finish with the FMTA 180 brushes.    

If you are also creating a mitre corner finish then use the Inoxitape to mask the corner to create a perfect sharp finish.

List Grid
Set Descending Direction
  1. TZ59 Zirconia 80 Grit grinding belt, 280 x 100mm. Abrasive Finishing Systems UK

    TZ59 Zirc 80# belt 280 x 100

    Excl. Tax: £2.80 Incl. Tax: £3.36
    TZ59 X weight Zirconium cloth belt 280 x 100mm - 80 grit
  2. 337DC Trizact A300 Satin Finishing Belt, 280 x 100mm. Abrasive Finishing Systems UK

    337DC Trizact A300 belt 280 x 100

    Excl. Tax: £6.79 Incl. Tax: £8.15
    Trizact 337DC Finishing belt A300 grit 280 x 100mm
  3. 19mm fmta keyway tex flap wheel - brush  finimaster basic ptx.jpg

    FMTA Tex 180# flap wheel 100 x 100 x 19 keyway

    Excl. Tax: £19.30 Incl. Tax: £23.16
    Finimaster Tex wheel - 100 x 100 x 19 mm 180 grit (Medium)
  4. inoxitape mitre finish roll.jpg


    Excl. Tax: £43.36 Incl. Tax: £52.03
    Inoxitape roll with easy use dispenser 5.0m x 40mm

Showing 1-4 of 4 View all

per page