• 25+ years specialist abrasives experience

  • Free standard delivery over £50 + vat

  • Stuck? Call us on 01677 470795

De-nibbing of paints & lacquers

The Denibbing process is needed for an intermediate or final sand before final coat spraying. We have included three grit options here dependent on the coating thickness you are working with and whether it is a water based or solvent lacquer. if you are working with a clear coat water based system. We recommend using the finest grit If you are working with a solid coat solvented paint sytem then we recommed the coarsest grit.
List Grid
Set Descending Direction
  1. CA330 Al Ox Paper Grip Discs 600 Grit 150mm x no hole. Abrasive Finishing Systems UK

    CA330 Al ox 600# grip disc 150 dia x no hole

    Excl. Tax: £0.35 Incl. Tax: £0.42 As low as: £0.33
    SA330 grip fixing discs - 600 grit 150mm diameter (no holes)
  2. CA330 Al Ox Paper Grip Discs 400 Grit 150mm x no hole. Abrasive Finishing Systems UK

    CA330 Al ox 400# grip disc 150 dia x no hole

    Excl. Tax: £0.35 Incl. Tax: £0.42 As low as: £0.33
    SA330 grip fixing discs - 400 grit 150mm diameter (no holes)
  3. SA331 Al Ox Paper Backed 800 Grit. 150mm x 6 holes. Abrasive Finishing Systems UK

    SA331 Al ox 800# grip disc 150 dia x 6 hole

    Excl. Tax: £0.63 Incl. Tax: £0.75
    SA331 grip fixing discs with film backing 150mm diameter (6 holes) 800 grit

Showing 1-3 of 3 View all

per page