• 25+ years specialist abrasives experience

  • Free standard delivery over £50 + vat

  • Stuck? Call us on 01677 470795

Fillet Weld Grinders

Removing fillet welds is not a problem as long as you have easy access to the weld.  But that is the problem!!  If your weld angle is 90 dgrees , or more acute, how do you get in.  That is why Cibo developed the FinitEasy fillet weld grinder.  A long reach arm built on a variable speed motor unit gives clear access with good visibility.  The only question then is, 'Which products do I need?'

The ideal product depends on the width of the weld.  With a tig weld you are normally looking at a weld radius of approx 3mm so we are recommending 3mm wide wheels for removing the weld.

SA 7:  Fast material removal of the metal to leave an approx 320 grit finish

SA5:  The SA5 will remove the top of the tig weld ripple and, more importantly, pre-polish the finish from the SA7 disc if you need to go to a finer and brighter finish.

List Grid
Set Descending Direction
  1. Unitised SA7 Disc For Finiteasy Fillet Weld Grinder 150 x 3 x 25.4mm. Abrasive Finishing Systems UK

    Unitised SA7 disc 150 x 3 x 25.4

    Excl. Tax: £18.22 Incl. Tax: £21.86
    Finit-easy unitised wheel - SA 7 150 x 3 x 25.4mm
  2. Unitised SA5 Disc For Finiteasy Fillet Weld Grinder 150 x 6 x 25.4mm. Abrasive Finishing Systems UK

    Unitised SA5 disc 150 x 6 x 25.4

    Excl. Tax: £23.91 Incl. Tax: £28.69
    Finit-easy unitised wheel - SA 5 150 x 6 x 25.4mm

Showing 1-2 of 2 View all

per page