• 25+ years specialist abrasives experience

  • Free standard delivery over £50 + vat

  • Stuck? Call us on 01677 470795

Mandrels for Spirabands, Caps, Cones & Cartidge Rolls

Mandrels for a Wide Range of Spirabands, Caps and Abrasive Cartridge Rolls

Use the Filter system to find the mandrel you require.  They are filtered by abrasive type, spindle diameter and where relevant shape

List Grid
Set Descending Direction
  1. skbh round mandrel.jpg

    SKBH Mandrel Domed cap 16x26mm

    Excl. Tax: £5.57 Incl. Tax: £6.68
    Mandrel for conical caps code SKB/#/1626 dimensions: 16(dia) x 26(h) x 3(spindle)
  2. shkh cone mandrel.jpg

    SHKH Mandrel Cone 18 X 85mm

    Excl. Tax: £13.21 Incl. Tax: £15.85
    Mandrel for conical sleeves 18(d) x 85(h) x 6(spindle)
  3. skbh round mandrel.jpg

    SKVH Mandrel Straight cap 16 x 26mm

    Excl. Tax: £5.57 Incl. Tax: £6.69
    Mandrel for straight caps code SKV/#/1626 dimensions: 16(dia) x 26(h) x 6mm (spindle)
  4. skbh round mandrel.jpg

    SKBH Mandrel Domed cap 13 X 19mm

    Excl. Tax: £5.41 Incl. Tax: £6.49
    Mandrel for conical caps code SKB/#/1319 dimensions: 13(dia) x 19(h) x 3(spindle)
  5. skbh round mandrel.jpg

    SKVH Mandrel Straight cap 10 X 15mm

    Excl. Tax: £5.41 Incl. Tax: £6.49
    Mandrel for straight caps code SKV/#/1015 dimensions: 10(dia) x 15(h) x 3(spindle)
  6. MHT6 Mandrel  Tapered thread 6mm spindle

    MHT6 Mandrel Tapered thread 6mm spindle

    Excl. Tax: £5.73 Incl. Tax: £6.88
    Tapered thread for felt bobs - 10mm shaft machined to fit 6mm collet
  7. MHT5R Tapered thread for Bench grinder Right hand

    MHT5R Tapered thread for Bench grinder Right hand

    Excl. Tax: £19.89 Incl. Tax: £23.87
    Tapered thread for cotton polishing mops Right hand 1/2" female thread
  8. MHT5L Tapered thread for Bench grinder Left hand

    MHT5L Tapered thread for Bench grinder Left hand

    Excl. Tax: £21.29 Incl. Tax: £25.54
    Tapered thread for cotton polishing mops Left hand 1/2" female thread
  9. Spindle shaft extension kit MH S17  allows extension of flap wheels and carbide burrs with 6mm collet

    MHS17 Mandrel - extension spindle with 6mm collet

    Excl. Tax: £115.16 Incl. Tax: £138.19
    Extension spindle for 8mm to 6mm with 6mm collet Over all length 145mm
  10. mh t3.jpg

    MHT3 Mandrel Tapered thread 6mm spindle

    Excl. Tax: £4.76 Incl. Tax: £5.72
    Tapered thread for lap mops + small cotton mops 6mm shaft

Hardware with a solid spindle (3, 6 or 8mm diameter)

Often fit onto drills and straight grinders with fixed collett
MH/A4 - Mandrel for Nu-Matic inflatable wheels 20mm thread length.  M14 thread x 8mm shaft
MH/S2 - Bell end shape mandrel for wheels 2 to 22mm width and up to 150mm diameter x 6mm bore
MH/S7 - Spindle for use with discs 8mm bore, 2.5 to 20mm width x 8mm spindle
MH/S17 - Extension spindle for 8mm to 6mm, length 145mm with 6mm collet.
MH/S18 - Spindle with open end for cartridge roll 3 (dia) x 65 (L) x 6 (spindle) mm
MH/S19 - Spindle with open end for cartridge roll 3 (dia) x 65 (L) x 3 (spindle) mm
MH/T3 - Mandrel with tapered thread for lap mops + small cotton mops.  6mm shaft
MH/T6 - Tapered thread for felt bobs - 10mm shaft machined to fit 6mm collet
SHSH - Cylindrical Spiraband Sleeve Mandrels
SHCH - Conical Sleeve Mandrels
SHEH - Flexible Cylindrical Sleeve Mandrels
SHKH - Conical Sleeve Mandrels 85mm Long
SKVH - Supports for Flat Ended Abrasive Caps
SKBH - Supports for Rounded Abrasive Caps
SKPH - Supports for Pointed Abrasive Caps
SKCH - Supports for Conical Abrasive Caps

Showing 21-30 of 47 View all

per page