Abrasive Caps, Cones, Sleeves and Cartridge Rolls  

Abrasive caps, cones, sleeves (spirabands) and cartridge rolls are used with a mandrel or are supplied ready mounted on a spindle.

They have a 3 or 6 mm spindle and are suitable for use with air tools, drills and bobbing sanders.

These small abrasives have been created to give access to areas which are normally difficult to access.

They enable easy access to complex areas, such as lattice work and internal areas inside pipes and tubes for example. They can be used for material removal, shaping, deburring, radiussing and finishing.

Cartridge Rolls are a solid roll of abrasive cloth in a conical or cylindrical form which fit onto a small mandrel with a tapered end. They are easy to use giving no vibration and are quick to change.

As the spiral- wound rolls become worn with use new abrasive material is exposed, ensuring an even finish.

Applications:

• Sanding in angles and difficult corners
• Machine mark removal in hard to access areas
• Internal sanding and de-burring
• Working in internal and complex areas
• Finishing in lattice work and mouldings

Product Information:

• Aluminium oxide grit abrasives
• 6 TO 25mm diameter

Abrasive caps are shaped similarly to a thimble and are constructed from a single layer of abrasive material. They are used on a shaped rubber mandrel and are excellent for deburring in all areas which are hard to reach, where the side faces are able to be used. They are easily changeable and available in a range of grits, shapes and sizes.

Applications:

• Machine fabrication
• Injection moldings
• Precision and mechanical applications
• Model constructionAerospace

Product Information:

• Available as domes, cones, points or flat shapes, with supporting rubber mandrels
• Aluminium oxide grit abrasives